Lowongan Drafter Civil ,Drafter Instrument-PT.Tegma Engineering

PT. Tegma Engineering dalah merupakan Perusahaan Konsultan Rekayasa Nasional yang bergerak di Industri Migas dan sedang menjalankan project Onshore Pipeline, membutuhkan segera :

1. Drafter Civil
    -  Maksimal Usia 35 Tahun
    -  Pendidikan Minimal STM/D3 Civil
    -  Memiliki Pengetahuan Dasar Tentang Bangunan Civil dan Structure
    -  Memahami Pembuatan Material Schedule dan Material Take Off
    -  Mampu Membaca Gambar Dalam Bahasa Inggris
    -  Bersedia Untuk Ditempatkan Di Area Project

2. Junior Instrument Engineer
    -  Fresh Graduate Jurusan Tekhnik Elektro / Fisika
    -  IPK Minimal 3.00 (skala 4)
    -  Menguasai Penggunaan Software CAD, PDMS, dll
    -  Menguasai Bahasa Inggris
    -  Bersedia untuk Ditempatkan Di Area Project

3. Instrument Drafter
    -  Maksimal Usia 35 Tshun
    -  Pendidikan Minimal STM/D3
    -  Memiliki Pengalaman Sebagai Drafter Instrument Minimal 2 Tahun Di Project Migas
    -  Menguasai Penggunaan Software Autocad 2D dan 3D
    -  Menguasai Penggunaan MS Office
    -  Bersedia Untuk Ditempatkan Di Area Project

Kirimkan CV Berserta Ijazah dan Surat Pengalaman Kerja Ke bangga@tegma-engineering.com

Drafter Sipil (CAD Sipil) (Jakarta Raya - Surabaya, Bali, dan Luar Jawa)

PT. Tatamulia Nusantara Indah bergerak dalam Jasa Konstruksi membutuhkan tenaga profesional untuk menangani proyek-proyek High Rise Building yang akan ditempatkan di berbagai posisi antara lain :


Drafter Sipil (CAD Sipil)
(Jakarta Raya - Surabaya, Bali, dan Luar Jawa)


Responsibilities:

Merawat hardware & software Komputer
Membuat gambar kerja
Requirements:

Berpengalaman 1-3 tahun di kontraktor bangunan sebagai Drafter Sipil / Drafter Mechanical & Electrical dalam proyek skala besar
Sanggup bekerja dalam schedule yang padat
Bersedia ditempatkan di Proyek Jawa (Jakarta, Surabaya, Bali) dan Luar Jawa

Hanya lamaran lengkap dan memenuhi syarat yang akan di proses
Untuk keterangan lebih lengkap, silahkan buka website kami di alamat
www.tatamulia.co.id
dan
Kirimkan lamaran lengkap beserta CV dan pas photo terakhir ke :
PT. Tatamulia Nusantara Indah
Sapta Mulia Center Lt. 2
Jl. Rawa Gelam V kav. OR-3B Kawasan Industri Pulogadung
Jakarta Timur 13930
(cantumkan Kode jabatan disudut kiri amplop)
atau lewat email : hrd@tatamulia.co.id

SENIOR DRAFTER - CIVIL AND STRUCTURAL

PT. AMEC Berca Indonesia (ABI) is a multi-national company providing engineering & asset support services to the Indonesian oil and gas industry. ABI plans to expand to other market segments and develop into EPC Company. Now, the company is seeking high qualified candidates to strengthen our team.

URGENTLY REQUIRED



1.    SUBJECT MATTER EXPERT (SME) – Operations and Maintenance

Responsibilities:
Working with a technical writer to develop content for operating and maintenance procedures; using your process knowledge and site-specific engineering information.
Reporting project progress to the Project Manager.
Contacting client and vendor representatives to obtain and clarify technical information; working remotely and during on-site visits.
Working within a team environment, using strong interpersonal skills while enabling seamless interaction with internal departments and client representatives.
Generating requests for information for client and vendor representatives.
Following and maintaining project standards.
Potentially leading and supporting a team of in-country technical writers.

Qualifications:
·         Degree or Diploma in Chemistry, Chemical Engineering, Mechanical Engineering.
·         A minimum of ten (10) years operating experience in the oil and gas industry.
·         Technical writing experience and/or equivalent process industry training experience is preferred.
·         Excellent English reading and writing skills are essential; additional languages considered an asset.
·         Ability to comprehend P&ID’s, vendor information, and process control descriptions.
·         A strong proficiency in MS Word is required.
·         Must be able to relocate to Jakarta or work on a rotational basis.
·         Must be able to travel and have a willingness to work on occasion in various field locations.

2.     ENGINEERING SUPERINTENDENT
Responsibilities
• Lead and control all Contractors’ Off-site Engineering activities during Contract period.
• Establish and maintain good alignment among engineering disciplines, 3D modeling team, project controls and document control to meet Company’s expectation during performance of Services. This shall include but not limited to: internal squad check system to ensure quality of deliverable prior to submission to Company, work completion on budget & schedule, proper engineering document & data management, etc.
• Work closely with Company during execution of Off-site Engineering Services, which shall include but not limited to: facilitating work proposal review process to achieve mutual agreement in timely manner, resolving related problems in timely manner, execution of regular lessons learned session to document best practices & improvement opportunities, etc.
• Ensure all systems, processes and procedures for execution of Off-site Engineering Services are consistently and well implemented to meet Company’s expectation during Contract period.
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge related to the performance of Engineering Services.
• Execute continuous mentoring program from senior to junior personnel during performance of Off-site Engineering Services, including tracking of its effectiveness and documenting the results.
• Report to and assist Manager Engineering for executing Off-site Engineering Services during the Contract period.
Qualifications:
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in various engineering works (including 3D modeling) for oil & gas or petrochemical handling projects and/or facilities, with minimum 10 years of which at supervisory position. Furthermore, several years of which shall cover following aspects:
• Minimum experience as Engineering Superintendent or Engineering Coordinator for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• For Non-Indonesian citizens minimum 5 years working experience outside of his/her home country, in supervising a group of engineering personnel from various disciplines (e.g. process, piping, mechanical, instrument & control, electrical, civil & structural, 3D modeling, etc.) with diverse nationalities.
• Alternative for Indonesian citizens, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of engineering personnel from various disciplines (e.g. process, piping, mechanical, instrument & control, electrical, civil & structural, 3D modeling, etc.) with diverse nationalities.
• The candidate shall have broad knowledge on various engineering aspects, such as: engineering multi-disciplines, 3D modeling implementation & software, engineering quality management, engineering execution management, internationally recognized engineering codes & standards, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.

3.      LEAD PROCESS ENGINEER
      Responsibilites :
·            Lead and supervise Contractors activities in development of deliverables in process engineering discipline during Contract period.
• Serve as SME (subject matter expert) in process engineering discipline during Contract period, including utilizing Contractors corporate internal and/or external professional networking as necessary
·            Implement QA/QC plan including internal squad check process for process discipline deliverables, prior to submission to Company
·             Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on process engineering discipline during performance of Engineering Services
 Report to and assist Superintendent Engineering for execution of Off-site and On-site Engineering Services during the Contract period
Requirements
•      Minimum education is to possess an engineering degree (S1) or equivalent.
•      The candidate shall have minimum 15 years working experience in process engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with 10 years of which at senior dan lead position. Furthermore, several years of which shall cover following aspects:
•      Minimum experience as Lead Process Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
•      Minimum 5 years working experience outside of his/her home country, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, 3D designers, designers, drafters, etc.) with diverse nationalities.
•      Alternative for Article (b) above for Group III National only, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of process engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
•      The candidate shall have thorough knowledge on the process engineering discipline and broad knowledge on various aspects, such as: process engineering software (refer to Attachment A5), internationally recognized engineering codes & standards, etc.
•      He candidate shall have extensive experience in facilitating and/or supporting HAZOPS and VIPs sessions, such as: Value Engineering, etc.
•      The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.

4.   PROCESS ENGINEER
Responsibilities
•    Prepare and complete development of process engineering deliverables.
•    Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
•    Work closely with Companys user(s) during review sessions of deliverables.
Requirements
•    Minimum education is to possess an engineering degree (S1) or equivalent, preferably Chemical Engineering.
•    The candidate shall have minimum 3 years working experience in process engineering works for oil & gas or petrochemical handling projects and/or facilities.
•    The candidate shall have adequate knowledge on process engineering discipline and capable to utilize related baseline software and codes/standards.
•    Able to join immediately.

5.         LEAD ENGINEER CIVIL AND STRUCTURAL

Responsibilities
• Lead and supervise Contractor’s activities in development of deliverables in respective engineering discipline (e.g. piping, mechanical, instrument & control, electrical, civil & structural) during Contract period.
• Serve as SME (subject matter expert) in respective engineering discipline during Contract period, including utilizing Contractor’s corporate internal and/or external professional networking as necessary.
• Implement Contractor’s QA/QC plan including internal squad check process for deliverables of the respective engineering discipline, prior to submission to Company.
• Interface with relevant professional organizations to get information on “state of the art” technologies/knowledge on related engineering discipline during performance of Engineering Services.
• Report to and assist Superintendent Engineering for execution of Off-site Engineering Services during the Contract period.
Qualifications: • Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 15 years working experience in related engineering discipline works (including 3D modeling related aspects) for oil & gas or petrochemical handling projects and/or facilities, with minimum 10 years of which at senior and lead position. Furthermore, several years of which shall cover following aspects.
• Minimum experience as Lead Design Engineer for EPC or ECM or EB contracts for oil & gas or petrochemical industries in the last 5 years.
• For Non-Indonesian citizens minimum 5 years working experience outside of his/her home country, in supervising a group of related engineering discipline personnel from various levels with diverse nationalities.
• Alternative for Indonesian citizens, minimum 8 years working experience with multi-national companies in Indonesia or minimum 8 years working experience in Indonesia on projects for multi-national companies with regular interface with the clients, in supervising a group of engineering discipline personnel from various levels (e.g. senior design engineers, design engineers, designers, drafters, etc.) with diverse nationalities.
• The candidate shall have thorough knowledge on the respective engineering discipline and broad knowledge on various aspects, such as: related engineering internationally recognized engineering codes & standards, etc.
• The candidate shall have strong supervisory capability and high skills for facilitation & coordination, mentoring & coaching and networking.

6.         DESIGN ENGINEER (CIVIL AND STRUCTURAL )

Responsibilities
• Prepare and complete development of related discipline engineering deliverables.
• Provide technical consultation for Facility construction and commissioning, if it’s required by Company to support Company’s related projects.
• Work closely with Company’s user(s) during review sessions of deliverables.
Qualification of Personnel • Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 3 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall have adequate knowledge on respective engineering discipline and capable to utilize with related baseline software and codes/standards.
• Eligible for Indonesia citizen, only.

7.          ELECTRICAL DESIGNER
Responsibilities
• Perform activities in the development of 3D engineering and drafting related to electrical discipline including activities planning and scheduling, at Contractor’s Off-site Engineering Office.
• Report to and assist Coordinator – 3D modeling related to execution of Off-site Engineering with 3D modeling basis.
Qualifications
• Minimum education is to possess engineering degree (S1) with minimum 5 years working experience or engineering diploma degree (D3) with minimum 8 years’ experience, both in providing project engineering services with 3D modeling basis.
• Minimum 3 years of which (with S1 degree) or 5 years of which (with D3 degree), working for project engineering with 3D modeling basis for oil and gas or petrochemical handling facilities
• The candidate shall have broad knowledge of electrical engineering discipline, and be fully conversant with 3D modeling baseline software (PDMS and Naviswork Review).
• Eligible for Indonesia citizen, only
8.      SENIOR DRAFTER - CIVIL AND STRUCTURAL

Responsibilities • Development of design drawings by using CADD in accordance with their function and objective as directed by Contractor’s Designer.
Qualifications
• Minimum education is to possess an engineering diploma degree (D3) with 4 years working experience or senior high school graduate (SMU) with 8 years working experience, both in design drafting by using CADD.
• Minimum 3 years of which (with D3 degree) or 6 years of which (for SMU graduate), working for oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be skilled to use CADD baseline software: Intergraph Micro station version 8i.


9.      SENIOR DESIGN ENGINEER  INSTRUMENTATION
Responsibilities:
• Prepare and complete discipline engineering design, coordinate Contractors activities in development of related discipline engineering deliverables
• Provide technical consultation for Facility construction and commissioning, if its required by Company to support Companys related projects.
• Work closely with Companys user(s) during review sessions of deliverables.
• Provide mentoring on related engineering discipline aspects to Contractors Design Engineers to enhance their competency.
Qualifications
• Minimum education is to possess an engineering degree (S1) or equivalent.
• The candidate shall have minimum 8 years working experience in related engineering discipline works for oil & gas or petrochemical handling projects and/or facilities, with minimum 3 years of which at senior engineer position.
• The candidate shall have thorough knowledge on related engineering discipline and be proficient with related baseline software (refer to Attachment A5) and codes/standards.
• For mechanical discipline, the candidate shall have suficient experience in providing technical specification & datasheet for procurement process, both for static or rotating equipment, and familiar with all associated codes & standards, such as: API 610, API 676, ASME-VIII Division 1/2, API 650, etc.
• For piping discipline, the candidate shall have sufficient experience in implementing 3D modeling for piping design and familiar with 3D baseline software (PDMS and Naviswork Review).
• The candidate shall have high mentoring & coaching skills.


10.     COST ESTIMATOR
Responsibilities
1) Perform cost estimating as part of the overall deliverable package for Customer
2) Prepare individual project Total Installed Cost (TIC) estimates at or above Class 3 (L: -10% - -20%; H: +10% - +30%) by using budgetary quotations for major equipment and by referring to historical data and/or appropriate cost benchmarks and/or professional judgment.
3) Work closely with Company and Companys contractors during performance of cost estimating & control services for Companys projects
4) Develop and maintain Contractors processes and procedures related with cost estimating & control.
5) Prepare detailed cost estimate for project execution covering all associated cost components (such as: detail engineering, construction, commissioning, equipment certification, construction management, procurement of goods & services, project overheads, etc.)
Requirements
1) The candidate shall have minimum 8 years working experience in cost estimating & control, with minimum 4 years of which are for oil & gas or petrochemical handling projects and/or facilities
2) The candidate shall have thorough knowledge on various cost estimating & control practices and related codes & standards, including associated software.
3) The candidate shall have thorough knowledge of local productivities, customs and labor practices and applicable local labor laws to the degree these have a material impact on TIC estimate.
4) The candidate shall have high skill for facilitation & coordination, and networking
5) Able to join immediately


DRAFTER SENIOR
Responsibilities:
•    Lead and control Contractors activities in the development of design drafting and the operation of Contractors drafting shops at Minas and Duri in Companys Area of operation
•   Work closely with Company for overall execution of On-site Drafting Services, including for resources planning, prioritization and leveling.
•   Develop and maintain drawing specifications, numbering and filing system.
•   Ensure that all processes and procedures in Contractors drafting execution and drafting QA/QC plan, are consistently and well implemented during Contract period.
·       Implement and monitor Contractors key performance indicators related to On-site Drafting Services.
·        Execute continuous mentoring program from senior to junior personnel in Contractors drafting shops during the performance of Services including tracking of its effectiveness and documenting the results.

·        Report to and assist Manager Engineering in executing On-site Drafting Services.
Qualifications
• Minimum education is to possess an engineering degree (S1) with 10 years working experience or engineering diploma degree (D3) with 15 years working experience, both in engineering design and drafting.
• Minimum 8 years of which (with S1 degree) or 12 years of which (with D3 degree), working in oil & gas or petrochemical handling projects and/or facilities.
• The candidate shall be fluent with all design codes and standards relevant to each discipline (process, mechanical & piping, electrical, instrument & control, civil & structural) which are relevant to the oil and gas industry.
• The candidate shall be proficient with CADD baseline software: Intergraph Microstation version 8i, and familiar with 3D modeling baseline software: PDMS and Naviswork Review.




Please submit a comprehensive Resume (word format) with name of position in “subject” not later than 20 September 2013


human.resources@amec-berca.co.id
(Only short-listed candidates will be contacted for further processes)

Drafter Sipil (CAD Sipil) (Jakarta Raya - Surabaya, Bali, dan Luar Jawa)

PT Tatamulia Nusantara Indah

PT. Tatamulia Nusantara Indah bergerak dalam Jasa Konstruksi membutuhkan tenaga profesional untuk menangani proyek-proyek High Rise Building yang akan ditempatkan di berbagai posisi antara lain :


Drafter Sipil (CAD Sipil)
(Jakarta Raya - Surabaya, Bali, dan Luar Jawa)



Requirements:

Berpengalaman 1-3 tahun di kontraktor bangunan sebagai Drafter Sipil dalam proyek skala besar
Mampu membuat gambar kerja
Sanggup bekerja dalam schedule yang padat
Mampu merawat hardware & software Komputer.
Bersedia ditempatkan di Proyek Jawa (Jakarta, Surabaya, Bali) dan Luar Jawa

Hanya lamaran lengkap dan memenuhi syarat yang akan di proses
Untuk keterangan lebih lengkap, silahkan buka website kami di alamat
www.tatamulia.co.id
dan
Kirimkan lamaran lengkap beserta CV dan pas photo terakhir ke :
PT. Tatamulia Nusantara Indah
Sapta Mulia Center Lt. 2
Jl. Rawa Gelam V kav. OR-3B Kawasan Industri Pulogadung
Jakarta Timur 13930
(cantumkan Kode jabatan disudut kiri amplop)
atau lewat email : hrd@tatamulia.co.id

Drafter Mechanical & Electrical (CAD M&E) (Jakarta Raya - Surabaya, Bali, dan Luar Jawa)

PT Tatamulia Nusantara Indah

PT. Tatamulia Nusantara Indah bergerak dalam Jasa Konstruksi membutuhkan tenaga profesional untuk menangani proyek-proyek High Rise Building yang akan ditempatkan di berbagai posisi antara lain :


Drafter Mechanical & Electrical (CAD M&E)
(Jakarta Raya - Surabaya, Bali, dan Luar Jawa)



Requirements:

Berpengalaman 1-3 tahun di kontraktor bangunan sebagai Drafter Mechanical & Electrical dalam proyek skala besar
Mampu membuat gambar kerja
Sanggup bekerja dalam schedule yang padat
Mampu merawat hardware & software Komputer.
Bersedia ditempatkan di Proyek Jawa (Jakarta, Surabaya, Bali) dan Luar Jawa

Hanya lamaran lengkap dan memenuhi syarat yang akan di proses
Untuk keterangan lebih lengkap, silahkan buka website kami di alamat
www.tatamulia.co.id
dan
Kirimkan lamaran lengkap beserta CV dan pas photo terakhir ke :
PT. Tatamulia Nusantara Indah
Sapta Mulia Center Lt. 2
Jl. Rawa Gelam V kav. OR-3B Kawasan Industri Pulogadung
Jakarta Timur 13930
(cantumkan Kode jabatan disudut kiri amplop)
atau lewat email : hrd@tatamulia.co.id

Drafter Jakarta Raya - Kelapa Gading

PT Karabha Sakti


Kami adalah perusahaan kontraktor yang memiliki pengalaman lebih dari 18 tahun diberbagai proyek antara lain pembangunan pabrik, gedung, showroom, komplek villa dan jalan. Saat ini perusahaan kami sedang melakukan perluasan usaha baik dibidang kontraktor maupun property developer.

Kantor pusat kami berlokasi didaerah Kelapa Gading, Jakarta Utara


Drafter
Jakarta Raya - Kelapa Gading



Requirements:

Pengalaman min 5 tahun sebagai drafterdi proyek konstruksi komplek Perumahan, gedung dan jalan
memiliki pengalaman sebagai estimator di perusahaan kontraktor ternama
Pendidikan Minimal D3 - Sipil/ Arsitektur dari universitas ternama
Menguasai/ fasih dalam menggunakan Autocad 2D dan 3D, sketch program, dan microsoft office.
Usia maksimal 30 tahun
Berbahasa inggris secara aktif (lisan dan tulisan)
Bersedia ditempatkan di proyek diseluruh Indonesia

Bagi pelamar yang serius, dapat mengirimkan CV, foto terbaru dan fotocopy ijasah melalui email ke :

Kontraktor_jakarta@yahoo.com

Drafter Civil Banten

PT Alam Dunia Engineering & Construction


Was established in September 2001. Since established, the company has executed several important projects in providing construction and engineering in Indonesia. With our industry experience since 1983 including a partnership in Indonesia between 1996 and 2001, the Company has maintained a highly skill.

Drafter Civil
Banten


Requirements:

STM or Diploma (D3) in Civil / Architecture.
Minimum 2 years of work experience in the same field.
Willing to be placed in all areas of the company.
Willing to achieve higher responsibility.
Able to work under pressure and meet tight schedule.
Computer literate (MS Office, CAD 2D & 3D).
Good proficiency of English : Both speaking & writing, min passive.
Good team player, hard worker, independent and discipline oriented spirit.
If you meet the qualifications mentioned above, please send your comprehensive resume, and recent photograph with contact number and email address within 2 weeks from the date of this advertisement to:

Email Address: recruitment@adunia.com

Drafter Jakarta Raya

PT Indobara Bahana


Our organization was established in 1970’s. It started with an idea of preserving environment and society; we adapt our business according to the element that related with human’s life (Water, Fire, and Environment). Our core business is including distributing, engineering, and procurement and contracting company for pumps, rotating equipment, fire protection, safety, security, environmental solution and services.

We strive to deliver the customers needs, service and solution throughout Indonesia by giving the high standard result. Our motto to be “One Team, One Plan, One Goal”, because we believe in working together wholeheartedly, we can achieve great success. So, we challenge the Top Performer employee to join our great team to overcome the extremely rapid growth for the following positions:

Drafter
Jakarta Raya



Responsibilities:

Gambar P&ID
Gambar Detail
Gambar Layout
Gambar Isometrik
Gambar As Built
Gambar AutoCad 3D
Gambar Piping

Requirements:

Pria
Usia Maksimal 30 tahun
STM semua jurusan
Bisa Ms.Office dan menggambar AutoCad
Lebih diutamakan berpengalaman
Jujur dan ber integritas
Pekerja keras dan mampu bekerja di bawah tekanan
Those who are interested and meet the above requirement, please send your complete application letter, resume, a recent photograph, at email subject to:

recruitment@indobara.co.id / ranita.amanda@indobara.co.id

PT. Indobara Bahana
Jl. Gunung Sahari no. 57G Jakarta Pusat
www.indobara.co.id

LOWONGAN DRAFTER ARSITEK

Dezan Studio adalah biro Arsitektur dan Interior yang berlokasi di Bintaro, Jakarta Selatan. Mengajak Anda bergabung dalam tim DRAFTER studio kami, dengan kualifikasi sbb;

DRAFTER

> Lulusan STM Bangunan/ D3
> Berpengalaman minimal 2 tahun
> Menguasai gambar kerja dan detail Arsitektur & Interior
> Mampu menerjemahkan gambar desain ke dalam gambar kerja
> Menguasai Autocad, teknik & standard layering & pen style Autocad
> Penguasaan program 3d Sketchup, Photoshop dan Powerpoint menjadi nilai tambah
> Bekerja teliti, cermat, efektif dan dapat bekerja dalam tim

Silahkan mengirimkan CV & contoh gambar melalui email: dezanstudio@yahoo.com

ELECTRICAL DRAFTER,STRUCTURAL DRAFTER,PIPING DRAFTER

PT. ALDABERTA INDONESIA
Offshore And Onshore Engineering And Services For Oil & Gas Industries

We are an Indonesian registered company that is fully licensed by the relevant government authorities to perform onshore and offshore facilities and pipeline design, integrity management and rehabilitation, training, instrumentation and control, pipeline operation and maintenance and submarine pipelines and structures for the Indonesian Offshore Oil and Gas Industry.

Seeking suitably qualified and experienced personnel for the following positions :

MANAGEMENT OFFICE (HEAD OFFICE)
A. PROJECT MANAGER
1. Min S1 in Chemical Engineering from reputable university.
2. Experience as Project Manager in Oil and Gas project more than 5 years.
3. Saving experience as Process Engineer at least more than 15 years in Oil and Gas Project.
4. Saving experience as Process Engineer (Process Design Engineer; Basic Design, FEED, Detailed Design project) minimum 6 years in Oil and Gas Project.
5. Have good leadership, communication, and coordination with team.

B. ENGINEERING MANAGER
1. Min S1 in Chemical Engineering from reputable university.
2. Experience as Engineering Manager in Oil and Gas project more than 5 years.
3. Saving experience as Process Engineer at least more than 10 years in Oil and Gas Project.
4. Saving experience as Process Engineer (Process Design Engineer; Basic Design, FEED, Detailed Design project) minimum 6 years in Oil and Gas Project.
5. Have good leadership, communication, and coordination with team.

C. PROPOSAL MANAGER
1. Min S1 in Chemical Engineering from reputable university.
2. Experience as Proposal Manager in Oil and Gas project more than 5 years.
3. Saving experience as Process Engineer at least more than 5 years in Oil and Gas Project.
4. Saving experience as Proposal Engineer minimum 6 years in Oil and Gas Project.
5. Have good leadership, communication, and coordination with team.

D. PROPOSAL STAFF
1. Min S1 in Chemical/Mechanical Engineering from reputable university.
2. Saving experience as Process/Mechanical Engineer at least more than 3 years in Oil and Gas Project.
3. Saving experience as Proposal Engineer minimum 3 years in Oil and Gas Project.
4. Can make administrative, technical, and commercial proposal for Oil and Gas Project.
5. Excellence in English (oral and written), good attitude, and having highly self motivation.
6. Willing to work extend office hour.
7. Attention to detail.
8. Able to maintain confidentiality of tender/project documents.
9. Ability to work hard, under pressure, strong interpersonal skill and ability to team work.

E. BUSINESS DEVELOPMENT
1. Female can apply.
2. Min S1 from reputable university.
3. Maximum 28 years old.
4. Saving experience as Business Development at least more than 3 years in Oil and Gas Project.
5. Have widely channel and collegue in Oil and Gas industry.
6. Excellence in English (oral and written), good attitude, and having highly self motivation.
7. Willing to work extend office hour.
8. Attention to detail.
9. Able to maintain confidentiality.
10. Ability to work hard, under pressure, strong interpersonal skill and ability to team work.

F. ACCOUNTING AND ACCOUNT RECEIVABLE
1. Female can apply.
2. Min S1 in accountancy from reputable university.
3. Maximum 28 years old.
4. Saving experience as account receivable at least more than 3 years in Oil and Gas Project.
5. Saving experience as accounting at least more than 3 years in Oil and Gas Project.
5. Have widely channel and collegue in Oil and Gas industry.
6. Excellence in English (oral and written), good attitude, and having highly self motivation.
7. Willing to work extend office hour.
8. Attention to detail.
9. Able to maintain confidentiality.
10. Ability to work hard, under pressure, strong interpersonal skill and ability to team work.

PROCESS (PROJECT TEAM)
A. LEAD PROCESS ENGINEER
1. Min. S1 in Chemical Engineering.
2. Experience as Lead in oil & gas EPC project at least 3 years.
3. Saving experience minimum 7 years as process engineer (Design Engineering) in oil & gas project
4. Familiar with HAZID/HAZOP activity
5. Good in coordination with others discipline team.

B. PROCESS ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as process engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with process design
4. Familiar with process design software such as HYSYS, etc
5. Familiar with PFD, PID, process datasheet, and process calculation.

C. PROCESS DESIGNER
1. Min. Technical High School Graduated
2. Experience as designer minimum 5 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review process drawing.

D. PROCESS DRAFTER
1. Min. Technical High School Graduated
2. Familiar with Autocad
3. Able to produce process drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil & gas project.

PROCESS SAFETY (PROJECT TEAM)
A. LEAD PROCESS SAFETY
1. Min. S1 in Chemical Engineering.
2. Experience as Process Safety Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as process safety engineer (Design Engineering) in oil & gas project
4. Familiar with HAZOP/HAZID activity
5. Good in coordination with others discipline team.

B. PROCESS SAFETY ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as process safety engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with process safety design
4. Familiar with process safety calculation, process safety equipment, QRA, ALARP, and safety studies.

C. PROCESS SAFETY DRAFTER
1. Min. High School Graduated
2. Familiar with Autocad
3. Able to produce process drawing with minimum supervision
4. Having experience minimum 5 years as drafter in oil & gas project

MECHANICAL (PROJECT TEAM)
A. LEAD MECHANICAL ENGINEER
1. Min. S1 in Mechanical Engineering
2. Experience as Mechanical Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as mechanical engineer (Design Engineering) in oil & gas project
4. Familiar with static and rotating equipment
5. Good in coordination with others discipline team

B. MECHANICAL STATIC ENGINEER
1. Min. S1 in Mechanical Engineering
2. Experience as mechanical static engineer minimum 5 years in oil & gas EPC project (Design Engineering)
3. Familiar with code and standard related with mechanical design
4. Able to develop mechanical datasheet and calculation.

C. MECHANICAL ROTATING ENGINEER
1. Min. S1 In Mechanical Engineering
2. Experience as mechanical engineer minimum 5 year in oil & gas EPC project (Design Engineering).
3. Familiar with code and standard related with mechanical design
4. Able to develop mechanical datasheet and calculation.

PIPING (PROJECT TEAM)
A. LEAD PIPING ENGINEER
1. Min. S1 in Mechanical Engineer
2. Experience as Piping Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as piping engineer in oil & gas project
4. Familiar with code and standard related to piping design
5. Good in coordination with others discipline team.

B. PIPING ENGINEER
1. Min. S1 in Mechanical Engineer
2. Experience as piping engineer minimum 5 years in oil & gas EPC project (Design Engineering)
3. Familiar with code and standard related with piping design
4. Able to develop piping design calculation and datasheets

C. PIPING DESIGNER
1. Min. Technical High School Graduated
2. Experience as designer minimum 10 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review piping drawing, MTO, plot plan, layout, and piping supports

D. PDMS PIPING ADMINISTRATOR
1. Min. Technical High School Graduated
2. Experience as PDMS admin minimum 8 years in oil & gas project
3. Familiar with PDMS module
4. Experience in create 3-D model complete with database

E. PDMS PIPING OPERATOR
1. Min. Technical High School Graduated
2. Experience as PDMS operator minimum 5 years in oil & gas project
3. Familiar with PDMS module
4. Experience in develop isometric drawing, 2-D drawing from 3-D model

F. PIPING DRAFTER
1. Min. Technical High School Graduated
2. Familiar with Autocad
3. Able to produce piping drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil & gas project


INSTRUMENTATION & TELECOM
A. LEAD INSTRUMENTATION ENGINEER
1. Min. S1 in Instrument&Control or Electrical Engineering
2. Experience as Instrumentation/Telecom Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as instrument engineer in oil & gas project
4. Familiar with code and standard related to instrumentation design
5. Good in coordination with others discipline team.

B. INSTRUMENTATION ENGINEER
1. Min. S1 In Instrument&Control or Electrical Engineering
2. Experience as instrument engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with instrument design
4. Able to develop instrument design calculation and datasheets

C. TELECOM ENGINEER
1. Min. S1 in Instrument&Control or Electrical Engineering
2. Experience as telecom engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with telecom design
4. Able to develop telecom design specifications and datasheets.

D. INSTRUMENTATION DESIGNER
1. Min. Technical High School Graduated
2. Experience as designer minimum 8 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review instrument drawing (layout, supports, panel, termination), MTO

E. PDMS INSTRUMENTATION & ELECTRICAL DESIGNER
1. Min. Technical High School Graduated
2. Experience as PDMS designer minimum 5 years in oil & gas project
3. Familiar with PDMS module
4. Experience in create 3-D model for E&I equipment/cable routing/tray/support

F. PDMS INSTRUMENTATION & ELECTRICAL OPERATOR
1. Min. Technical High School Graduated
2. Experience as PDMS operator minimum 3 years in oil & gas project
3. Familiar with PDMS module
4. Experience in develop cable tray drawing, 2-D drawing from 3-D model

G. INSTRUMENTATION & ELECTRICAL DRAFTER
1. Min. Technical High School Graduated
2. Familiar with Autocad
3. Able to produce E&I drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil & gas project.

ELECTRICAL (PROJECT TEAM)
A. LEAD ELECTRICAL ENGINEER
1. Min. S1 in Electrical Engineering
2. Experience as Electrical Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as electrical engineer in oil & gas project
4. Familiar with code and standard related to electrical design
5. Good in coordination with others discipline team.

B. ELECTRICAL ENGINEER
1. Min. S1 in Electrical Engineering
2. Experience as electrical engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with electrical design
4. Able to develop electrical calculation, specifications and cable sizing.

C. ELECTRICAL DRAFTER
1. Min. Technical High School Graduated
2. Familiar with Autocad
3. Able to produce E&I drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil&gas project.

STRUCTURAL (PROJECT TEAM)
A. SENIOR STRUCTURAL ENGINEER
1. Min. S1 in Civil/Structure Engineering
2. Experience as Structure Lead in oil & gas EPC project at least 3 years.
3. Experience as Structural Engineer minimum 7 years in oil and gas project.
4. Familiar with code and standard related with onshore and offshore structure design
5. Able to develop Structure design calculation and using SACS program.

B. STRUCTURAL ENGINEER
1. Min. S1 in Civil/Structure Engineering
2. Experience as Structural Engineer minimum 5 years in oil and gas project.
3. Familiar with code and standard related with onshore and offshore structure design
4. Able to develop Structure design calculation and using SACS/Staad pro program.

C. PDMS STRUCTURAL DESIGNER
1. Min. Technical High School Graduated
2. Experience as designer minimum 8 years in oil & gas project
3. Experiences in Offshore project min 5 years
3. Familiar with Autocad and PDMS
4. Experience in producing and review structural drawing & MTO

C. PDMS STRUCTURAL OPERATOR
1. Min.Technical High School Graduated
2. Experience as PDMS operator minimum 3 years in oil & gas project
3. Familiar with PDMS module
4. Experience in develop structural drawing, 2-D drawing from 3-D model

D. STRUCTURAL DRAFTER
1. Min. Technical High School Graduated
2. Experience as designer minimum 8 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review structure drawings & MTO

HSE (PROJECT TEAM)
A. LEAD HSE ENGINEER
1. Min. S1 in Mechanical/Electrical/Chemical/Instrument&Control/Enviroment Engineer
2. Experience as HSE Engineer minimum 8 years in oil & gas project
3. Familiar with HAZID/HAZOP activity
4. Familiar with Contractor Safety Management System (CSMS)
5. Familiar with code and standard related with process safety design.
6. Have a deep knowledge of the safety risk management process (qualitative and quantitative).

B. HSE ENGINEER
1. Min. S1 in Mechanical/Electrical/Chemical/Instrument&Control/Enviroment Engineer
2. Experience as HSE Engineer minimum 5 years in oil & gas project
3. Familiar with HAZID/HAZOP activity
4. Familiar with Contractor Safety Management System (CSMS)
5. Familiar with code and standard related with process safety design.
6. Have a deep knowledge of the safety risk management process (qualitative and quantitative).

COMMISIONING (PROJECT TEAM)
A. LEAD COMMISIONING ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as Commisioning Engineer minimum 5 years in Oil and Gas project.
3. Experience as Process Engineer minimum 3 years in Oil and gas project.
4. Have good leadership, communication, and coordination with team

B. COMMISIONING ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as Commissioning Engineer minimum 5 years in Oil and Gas project.



For those who qualify, send your Application Letter, Curriculum Vitae, and Supporting Certificates (academic, ID, NPWP, latest packaging, photo). Note the position to proposed, expected salary, and your current salary to:

PT. ALDABERTA INDONESIA
Gedung Menara 165, Lantai 9
JL. TB. Simatupang kav.1, Jakarta Selatan 12560
Website : www.aldaberta.com

or email to:
1. rochmat.tomi@aldaberta.com
2. f.moko@aldaberta.com
and CC to :
1. afiatmoko.fitriardi@gmail.com

Drafter & designer PT Aldaberta Indonesia

PT. ALDABERTA INDONESIA

Offshore And Onshore Engineering And Services For Oil & Gas Industries
We are an Indonesian registered company that is fully licensed by the relevant government authorities to perform onshore and offshore facilities and pipeline design, integrity management and rehabilitation, training, instrumentation and control, pipeline operation and maintenance and submarine pipelines and structures for the Indonesian Offshore Oil and Gas Industry.
Seeking suitably qualified and experienced personnel for the following positions :

MANAGEMENT OFFICE (HEAD OFFICE)
A. PROJECT MANAGER
1. Min S1 in Chemical Engineering from reputable university.
2. Experience as Project Manager in Oil and Gas project more than 5 years.
3. Saving experience as Process Engineer at least more than 15 years in Oil and Gas Project.
4. Saving experience as Process Engineer (Process Design Engineer; Basic Design, FEED, Detailed Design project) minimum 6 years in Oil and Gas Project.
5. Have good leadership, communication, and coordination with team.

B. ENGINEERING MANAGER
1. Min S1 in Chemical Engineering from reputable university.
2. Experience as Engineering Manager in Oil and Gas project more than 5 years.
3. Saving experience as Process Engineer at least more than 10 years in Oil and Gas Project.
4. Saving experience as Process Engineer (Process Design Engineer; Basic Design, FEED, Detailed Design project) minimum 6 years in Oil and Gas Project.
5. Have good leadership, communication, and coordination with team.

C. PROPOSAL MANAGER
1. Min S1 in Chemical Engineering from reputable university.
2. Experience as Proposal Manager in Oil and Gas project more than 5 years.
3. Saving experience as Process Engineer at least more than 5 years in Oil and Gas Project.
4. Saving experience as Proposal Engineer minimum 6 years in Oil and Gas Project.
5. Have good leadership, communication, and coordination with team.

D. PROPOSAL STAFF
1. Min S1 in Chemical/Mechanical Engineering from reputable university.
2. Saving experience as Process/Mechanical Engineer at least more than 3 years in Oil and Gas Project.
3. Saving experience as Proposal Engineer minimum 3 years in Oil and Gas Project.
4. Can make administrative, technical, and commercial proposal for Oil and Gas Project.
5. Excellence in English (oral and written), good attitude, and having highly self motivation.
6. Willing to work extend office hour.
7. Attention to detail.
8. Able to maintain confidentiality of tender/project documents.
9. Ability to work hard, under pressure, strong interpersonal skill and ability to team work.

E. BUSINESS DEVELOPMENT
1. Female can apply.
2. Min S1 from reputable university.
3. Maximum 28 years old.
4. Saving experience as Business Development at least more than 3 years in Oil and Gas Project.
5. Have widely channel and collegue in Oil and Gas industry.
6. Excellence in English (oral and written), good attitude, and having highly self motivation.
7. Willing to work extend office hour.
8. Attention to detail.
9. Able to maintain confidentiality.
10. Ability to work hard, under pressure, strong interpersonal skill and ability to team work.


F. ACCOUNTING AND ACCOUNT RECEIVABLE
1. Female can apply.
2. Min S1 in accountancy from reputable university.
3. Maximum 28 years old.
4. Saving experience as account receivable at least more than 3 years in Oil and Gas Project.
5. Saving experience as accounting at least more than 3 years in Oil and Gas Project.
5. Have widely channel and collegue in Oil and Gas industry.
6. Excellence in English (oral and written), good attitude, and having highly self motivation.
7. Willing to work extend office hour.
8. Attention to detail.
9. Able to maintain confidentiality.
10. Ability to work hard, under pressure, strong interpersonal skill and ability to team work.

PROCESS (PROJECT TEAM)
A. LEAD PROCESS ENGINEER
1. Min. S1 in Chemical Engineering.
2. Experience as Lead in oil & gas EPC project at least 3 years.
3. Saving experience minimum 7 years as process engineer (Design Engineering) in oil & gas project
4. Familiar with HAZID/HAZOP activity
5. Good in coordination with others discipline team.

B. PROCESS ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as process engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with process design
4. Familiar with process design software such as HYSYS, etc
5. Familiar with PFD, PID, process datasheet, and process calculation.

C. PROCESS DESIGNER
1. Min. Technical High School Graduated
2. Experience as designer minimum 5 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review process drawing.

D. PROCESS DRAFTER
1. Min. Technical High School Graduated
2. Familiar with Autocad
3. Able to produce process drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil & gas project.

PROCESS SAFETY (PROJECT TEAM)
A. LEAD PROCESS SAFETY
1. Min. S1 in Chemical Engineering.
2. Experience as Process Safety Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as process safety engineer (Design Engineering) in oil & gas project
4. Familiar with HAZOP/HAZID activity
5. Good in coordination with others discipline team.

B. PROCESS SAFETY ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as process safety engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with process safety design
4. Familiar with process safety calculation, process safety equipment, QRA, ALARP, and safety studies.

C. PROCESS SAFETY DRAFTER
1. Min.High School Graduated
2. Familiar with Autocad
3. Able to produce process drawing with minimum supervision
4. Having experience minimum 5 years as drafter in oil & gas project

MECHANICAL (PROJECT TEAM)

A. LEAD MECHANICAL ENGINEER
1. Min. S1 in Mechanical Engineering
2. Experience as Mechanical Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as mechanical engineer (Design Engineering) in oil & gas project
4. Familiar with static and rotating equipment
5. Good in coordination with others discipline team

B. MECHANICAL STATIC ENGINEER
1. Min. S1 in Mechanical Engineering
2. Experience as mechanical static engineer minimum 5 years in oil & gas EPC project (Design Engineering)
3. Familiar with code and standard related with mechanical design
4. Able to develop mechanical datasheet and calculation.

C. MECHANICAL ROTATING ENGINEER
1. Min. S1 In Mechanical Engineering
2. Experience as mechanical engineer minimum 5 year in oil & gas EPC project (Design Engineering).
3. Familiar with code and standard related with mechanical design
4. Able to develop mechanical datasheet and calculation.

PIPING (PROJECT TEAM)
A. LEAD PIPING ENGINEER
1. Min. S1 in Mechanical Engineer
2. Experience as Piping Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as piping engineer in oil & gas project
4. Familiar with code and standard related to piping design
5. Good in coordination with others discipline team.

B. PIPING ENGINEER
1. Min. S1 in Mechanical Engineer
2. Experience as piping engineer minimum 5 years in oil & gas EPC project (Design Engineering)
3. Familiar with code and standard related with piping design
4. Able to develop piping design calculation and datasheets

C. PIPING DESIGNER
1. Min.Technical High School Graduated
2. Experience as designer minimum 10 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review piping drawing, MTO, plot plan, layout, and piping supports

D. PDMS PIPING ADMINISTRATOR
1. Min.Technical High School Graduated
2. Experience as PDMS admin minimum 8 years in oil & gas project
3. Familiar with PDMS module
4. Experience in create 3-D model complete with database

E. PDMS PIPING OPERATOR
1. Min.Technical High School Graduated
2. Experience as PDMS operator minimum 5 years in oil & gas project
3. Familiar with PDMS module
4. Experience in develop isometric drawing, 2-D drawing from 3-D model

F. PIPING DRAFTER
1. Min.Technical High School Graduated
2. Familiar with Autocad
3. Able to produce piping drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil & gas project

INSTRUMENTATION & TELECOM
A. LEAD INSTRUMENTATION ENGINEER
1. Min. S1 in Instrument&Control or Electrical Engineering
2. Experience as Instrumentation/Telecom Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as instrument engineer in oil & gas project
4. Familiar with code and standard related to instrumentation design
5. Good in coordination with others discipline team.

B. INSTRUMENTATION ENGINEER
1. Min. S1 In Instrument&Control or Electrical Engineering
2. Experience as instrument engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with instrument design
4. Able to develop instrument design calculation and datasheets

C. TELECOM ENGINEER
1. Min. S1 in Instrument&Control or Electrical Engineering
2. Experience as telecom engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with telecom design
4. Able to develop telecom design specifications and datasheets.

D. INSTRUMENTATION DESIGNER
1. Min. Technical High School Graduated
2. Experience as designer minimum 8 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review instrument drawing (layout, supports, panel, termination), MTO

E. PDMS INSTRUMENTATION & ELECTRICAL DESIGNER
1. Min.Technical High School Graduated
2. Experience as PDMS designer minimum 5 years in oil & gas project
3. Familiar with PDMS module
4. Experience in create 3-D model for E&I equipment/cable routing/tray/support

F. PDMS INSTRUMENTATION & ELECTRICAL OPERATOR
1. Min. Technical High School Graduated
2. Experience as PDMS operator minimum 3 years in oil & gas project
3. Familiar with PDMS module
4. Experience in develop cable tray drawing, 2-D drawing from 3-D model

G. INSTRUMENTATION & ELECTRICAL DRAFTER
1. Min.Technical High School Graduated
2. Familiar with Autocad
3. Able to produce E&I drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil & gas project.

ELECTRICAL (PROJECT TEAM)
A. LEAD ELECTRICAL ENGINEER
1. Min. S1 in Electrical Engineering
2. Experience as Electrical Lead in oil & gas EPC project at least 3 years.
3. Having experience minimum 7 years as electrical engineer in oil & gas project
4. Familiar with code and standard related to electrical design
5. Good in coordination with others discipline team.

B. ELECTRICAL ENGINEER
1. Min. S1 in Electrical Engineering
2. Experience as electrical engineer minimum 5 years in oil & gas EPC project
3. Familiar with code and standard related with electrical design
4. Able to develop electrical calculation, specifications and cable sizing.

C. ELECTRICAL DRAFTER
1. Min.Technical High School Graduated
2. Familiar with Autocad
3. Able to produce E&I drawing with minimum supervision
4. Having experience minimum 3 years as drafter in oil&gas project.

STRUCTURAL (PROJECT TEAM)

A. SENIOR STRUCTURAL ENGINEER
1. Min. S1 in Civil/Structure Engineering
2. Experience as Structure Lead in oil & gas EPC project at least 3 years.
3. Experience as Structural Engineer minimum 7 years in oil and gas project.
4. Familiar with code and standard related with onshore and offshore structure design
5. Able to develop Structure design calculation and using SACS program.

B. STRUCTURAL ENGINEER
1. Min. S1 in Civil/Structure Engineering
2. Experience as Structural Engineer minimum 5 years in oil and gas project.
3. Familiar with code and standard related with onshore and offshore structure design
4. Able to develop Structure design calculation and using SACS/Staad pro program.

C. PDMS STRUCTURAL DESIGNER
1. Min.Technical High School Graduated
2. Experience as designer minimum 8 years in oil & gas project
3. Experiences in Offshore project min 5 years
3. Familiar with Autocad and PDMS
4. Experience in producing and review structural drawing & MTO

D. PDMS STRUCTURAL OPERATOR
1. Min.Technical High School Graduated
2. Experience as PDMS operator minimum 3 years in oil & gas project
3. Familiar with PDMS module
4. Experience in develop structural drawing, 2-D drawing from 3-D model

E. STRUCTURAL DRAFTER
1. Min. Technical High School Graduated
2. Experience as designer minimum 8 years in oil & gas project
3. Familiar with Autocad and PDMS
4. Experience in producing and review structure drawings & MTO

HSE (PROJECT TEAM)
A. LEAD HSE ENGINEER
1. Min. S1 in Mechanical/Electrical/Chemical/Instrument&Control/Enviroment Engineer
2. Experience as HSE Engineer minimum 8 years in oil & gas project
3. Familiar with HAZID/HAZOP activity
4. Familiar with Contractor Safety Management System (CSMS)
5. Familiar with code and standard related with process safety design.
6. Have a deep knowledge of the safety risk management process (qualitative and quantitative).


B. HSE ENGINEER
1. Min. S1 in Mechanical/Electrical/Chemical/Instrument&Control/Enviroment Engineer
2. Experience as HSE Engineer minimum 5 years in oil & gas project
3. Familiar with HAZID/HAZOP activity
4. Familiar with Contractor Safety Management System (CSMS)
5. Familiar with code and standard related with process safety design.
6. Have a deep knowledge of the safety risk management process (qualitative and quantitative).

COMMISIONING (PROJECT TEAM)

A. LEAD COMMISIONING ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as Commisioning Engineer minimum 5 years in Oil and Gas project.
3. Experience as Process Engineer minimum 3 years in Oil and gas project.
4. Have good leadership, communication, and coordination with team

B. COMMISIONING ENGINEER
1. Min. S1 in Chemical Engineering
2. Experience as Commisioning Engineer minimum 5 years in Oil and Gas project.


For those who qualify, send your Application Letter, Curriculum Vitae, and Supporting Certificates (academic, ID, NPWP, latest packlaring, photo). Note the position to proposed, expected salary, and your current salary to:

PT. ALDABERTA INDONESIA
Gedung Menara 165, Lantai 9
JL. TB. Simatupang kav.1, Jakarta Selatan
12560
Website : www.aldaberta.com

or email to:
1.      rochmat.tomi@aldaberta.com
2.      f.moko@aldaberta.com
and CC to :
1.   afiatmoko.fitriardi@gmail.com

jobs drafter PT. Tegma Engineering

PT. Tegma Engineering is an engineering consultant for the Oil & Gas industry projects, where as currently is seeking to fill several vacant positions. These positions will be based in our main office at South Jakarta
Electrical Drafter
Civil Drafter
Instrument Drafter
Piping Drafter
- Experience min 1 year as a drafter
- Ability to work under pressure with strong attention to detail
- Work as part of a team and be committed to ongoing business improvement
Interested candidates should send their resume in English to:
Email:tegmainfo@tegma-engineering.com

Drafter (DRF-BLKPP) Palembang (Sumatera Selatan)

Sinarmas Land


A Career at Sinar Mas Land is truly a one-of-a-kind experience. It’s more than working for Indonesia’s leading property developer; it is an opportunity to be a part of something that impacts the future. We offer you not only the chance to build a successful career – we offer you an opportunity to make a difference in the world.

     We are humbled by the numerous international recognitions for our commitment to innovation and environmental excellence. Recently, we have been awarded with the International Property Awards Asia Pacific, Green Mark Gold Award from The Building and Construction Authority (BCA) Singapore, FIABCI International and FIABCI Indonesia. Together, we are building for a better future. As a part of Sinar Mas Group, our boundless opportunities attract the very best experienced professionals, like yourself. Now more than ever is the time to become part of Sinar Mas Land.

     From the first house that we built 40 years ago to our current broad portfolio of property projects, the goal has been simple – to build and to be trusted. But as our products grew and diversified, our Vision & Values are taking shape and escalating our people and our organization to the next level. We currently have more than 10.000 hectares of land bank, a wide array of city, township, residential, commercial, retail, industrial estates and hospitality properties developments. What does this mean for your career? Unlimited possibilities. Let’s build a better future together.

Drafter (DRF-BLKPP)
Palembang (Sumatera Selatan)



Requirements:

Age max 30 years old
At least Diploma Degree of Civil Engineering
At least 3 years experience in same field
Computer literate (Ms Office and AutoCAD)
Innovative, discipline, honest, diligent, and have integrity
Willing to be place at Palembang

Interested applicants please submit CV to :

career@sinarmasland.com

and put the code of position in subject email.
Only short listed candidates will be notified for interview.

Drafter Tekla Sidoarjo (Jawa Timur)

PT Supra Surya Indonesia


PT Supra Surya Indonesia adalah perusahaan kontraktor umum yang bergerak dalam bidang jasa sipil, konstruksi baja, dan mechanical. Sejak didirikan pada Bulan Juli tahun 1980, PT Supra Surya Indonesia telah berkembang dengan pesat di tangan karyawan/staf profesional di bawah manajemen yang handal dalam hal desain dan teknik, fabrikasi, rantai pasokan, manajemen proyek, dan pengembangan usaha berstandar ISO 9001:2008


Drafter Tekla
Sidoarjo (Jawa Timur)



Requirements:

Laki-laki/Perempuan, maks. 35 tahun.
Mampu mengoperasikan program Tekla (Modelling 3D & Editing Shop Dwg)
Pengalaman min 2 tahun, di bidang yang sama
Pendidikan minimal SMK / D3
Mampu mengoperasikan AutoCAD
Bersedia ditempatkan di wilayah Sidoarjo, Jawa Timur
 Send your complete application, CV, colored photo and write the Position Name for subject, to email :

hrd@pt-ssi.com

Civil Drafter Batam (Kepulauan Riau)

PT Mesta Sarana Bangun


PT. MESTA SARANA BANGUN, adalah perusahaan yang bergerak di bidang Consultants, Contractors, Developer, Trading, Supplier saat ini  membutuhkan tenaga teknik dan administrasi proyek untuk di tempatkan di Batam, dengan syarat sebagai berikut:

Civil Drafter
Batam (Kepulauan Riau)



Requirements:

Laki-laki atau perempuan, usia maksimal 32 tahun,
Pendidikan minimal D3 sipil,
Pengalaman sebagai drafter minimal 3 tahun,
Menguasai Autocad dan 3D Cad,
Merupakan nilai tambah kalau menguasai aplikasi 3D lainnya,
Merupakan nilai tambah kalau menguasai aplikasi pengolahan gambar,
Dapat  bekerjasama  dalam  team,
Mampu membaca gambar dan mendetailkan gambar teknik baik sipil atau M/E akan menjadi nilai tambah tersendiri,
Berdomisili di area Batam.
Surat Lamaran, CV dan Portofolio dikirim ke email : info@mestasarana bagun.com

Drafter (Kode DR) Bekasi (Jawa Barat)

PT Adeha Metalindo
 Kami adalah Perusahaan berlokasi di kawasan Indusrti Cikarang yang bergerak di bidang Pembuatan dan Pemasangan Roofing, Clading, dan KrupDeck, dan salah satu yang terbesar di Indonesia.
Kami banyak mendapatkan proyek-proyek besar di Indonesia, dan kami membutuhkan tenaga-tenaga profesional muda, berbakat dan berdedikasi tinggi untuk bergabung sebagai
                                                             Drafter (Kode DR)
                                                              Bekasi (Jawa Barat)
 Requirements:   Pria min SMK /STM Teknik bangunan Pengalaman min 2 th, Sebagai drafter Gedung/ bangunan Memahami kontruksi Baja Usia Maksimal 30 th Tegas, Teliti dan Jujur Mampu berkerja dibawah tekanan Bersedia di tempatkan di Lokasi Proyek Luarkota Kirimkan lamaran lengkap +CV foto berwarna dan gaji yang diinginkan. Email ditujukan ke : prins@adeha.co.id

Civil Engineer,Drafter for bontang kalimantan timur

PT. Yepeka Usaha Mandiri membutuhkan segera tenaga dengan kualifikasi sbb untuk ditempatkan di Bontang – Kalimantan Timur : 1. Civil Engineer b. 1 orang Sarjana Teknik Sipil pengalaman minimal 3 tahun. c. Menguasai program analisa struktur (Staad atau yang lainnya) d. Menguasai program penggambaran (Autocad) e. Menguasai desain bangunan/stuktur, soil improvement, dinding penahan tanah/slope stability maupun sarana-prasarana lain seperti jalan, saluran, plumbing dll f. Mampu membuat general specification maupun individual specification untuk pelaksanaan pekerjaan (desain dan construction) teknik Sipil g. Mampu membuat bill of quantity dan RAB (rencana anggaran & biaya) proyek. h. Mampu melakukan review terhadap semua hasil perhitungan/desain pekerjaan teknik Sipil dan semua disiplin terkait i. Mampu membuat dan melakukan review metode kerja pelaksanaan pekerjaan Sipil dan disiplin terkait. j. Mampu melakukan supervisi pada pekerjaan teknik Sipil dan mampu menyelesaikan permasalahan yang dihadapi di lapangan. k. Umur pada saat mengajukan lamaran kerja tidak lebih dari 30 tahun dan diutamakan tidak merokok. 2. Drafter a. Pendidikan minimal D3, pengalaman minimal 3 tahun b. Mampu mengoperasikan Autocad, Office, Solid modeling c. Dapat menggunakan alat ukur d. Memahami toleransi/ standard toleransi e. Dapat bekerja di lapangan/ diluar lapangan f. Tidak takut pada bekerja pada ketinggian g. Berkemampuan reverse engineering Lamaran paling lambat diterima 10 Januari 2013, Mohon cantumkan gaji yang diharapkan dan kirim ke lowongan@yum.co.id

Material Control/Drafter/Electrical/Safety office/PPC/Tukang gambar/Engineer elektrik/Safety

BASUKI PRATAMA ENGINEERING, PT DIBUTUHKAN SEGERA!!! Sebuah perusahaan Nasional dalam bidang Boilers, Thermal Oil Heaters, Heat Exchanger, Dryer yang produknya telah diekspor ke negara lain seperti Amerika Serikat, Inggris, Australia, Finlandia, New Zealand, Malaysia, Singapore, Pilipina, Pakistan, Guatemala, Nigeria, dsb. membutuhkan tenaga-tenaga muda untuk bersama-sama mengembangkan produk Nasional yang mampu bersaing di pasar dunia. Material Control/Drafter/Electrical/Safety office/PPC/Tukang gambar/Engineer elektrik/Safety I. PPC (Pengecek Material/Material Control) Syarat-syarat utama: 1. Lulusan minimal D3/S1 Teknik 2. Dapat membaca gambar teknik dengan baik. 3. Pengalaman dalam bidang pengecekan/pengontrol Material min. 2 thn 4. Maksimal usia 35 tahun II. Senior Drafter Syarat-syarat utama: 1. Lulusan minimal D3/S1 Tehnik 2. Dapat membaca gambar teknik dengan baik 3. Pengalaman Min. 2 tahun 4. Maksimal usia 37 tahun III. Maintenance Elektrik Syarat-syarat utama: 1. Lulusan minimal STM/D3 Tehnik Listrik 2. Menguasai/Mengerti PLC dan Membaca Wiring Diagram 3. Pengalaman Min. 2 tahun 4. Maksimal usia 35 tahun IV. Staff Keselamatan Kerja (Safety Officer) Syarat-syarat utama: 1. Lulusan min. D3/S1 2. Menguasai/Mengerti Standard K3 (Safety) 3. Pengalaman Min. 4 tahun 4. Maksimal usia 35 tahun Hanya yang memenuhi persyaratan minimal di atas yang akan dipanggil untuk wawancara, silahkan kirimkan lamaran kerja langsung ke: carrers@basuki.com

Drafter Mechanical dan Electrical

PT Indobara Bahana Our organization was established in 1970's. It started with an idea of preserving environment and society; we adapt our business according to the element that related with human's life (Water, Fire, and Environment). Our core business is including distributing, engineering, and procurement and contracting company for pumps, rotating equipment, fire protection, safety, security, environmental solution and services. We strive to deliver the customers needs, service and solution throughout Indonesia by giving the high standard result. Our motto to be "One Team, One Plan, One Goal", because we believe in working together wholeheartedly, we can achieve great success. So, we challenge the Top Performer employee to join our great team to overcome the extremely rapid growth for the following positions: Drafter Mechanical dan Electrical Jakarta Pusat (Jakarta Raya) Responsibilities: Mampu membuat P&ID Mampu menggambar detail Mampu membuat gambar layout Mampu membuat gambar isometric Mampu membuat gambar as built Requirements: Male STM / SMK Teknik mekanikal dan elektrikal Lebih diutamakan berpengalaman (Fresh Graduate are welcome) Mengerti elektikal dan mekanikal Mampu mengoperasikan MS Office, Uto Cad Menguasai bahasa inggris Mampu bekerjasama dalam team Those who are interested and meet the above requirement, please send your complete application letter, resume, a recent photograph, at email subject to: recruitment@indobara.co.id PT. Indobara Bahana Jl. Gunung Sahari no. 57G Jakarta Pusat www.indobara.co.id

Drafter Structural (Building) - Jabodetabek

Since its establishment in 1975, PT Kajima Indonesia has grown into a leading company that provides design and engineering, construction and development with International recognition. Due to executed our new project, we are now intended to strengthen our Construction Team and are seeking qualified candidates for the following position : Drafter Structural (Building) - Jabodetabek Jakarta Raya, Bekasi (Jawa Barat), Bogor (Jawa Barat), Cikarang (Jawa Barat), Karawang (Jawa Barat) Responsibilities: Develop efective shop drawing Coordinate structural designs (some project also doing electrical and mechanical design) and determine a method of presentation in order to graphically represent building plans. Creating List Acceptance Images Document, Master List of Images Document, and Image Distribution List Develop as built drawing Requirements: Male Graduated from reputable university (architectural/civil engineering) Computer skill (Auto CAD, MS Office, MS Power Point etc.) Having 2 years or more experience doing concrete / structural design (High Rise Building project under Japanese contractor and/or major international contractors is preferred) Good communication skill in English (both oral and writing) Interested candidates should send their application in writing together with CV, recent photograph and other related supporting documents no later than 10 (ten) working days after this advertisement to: PT. Kajima Indonesia Sentral Senayan II, 3rd Floor Jl. Asia Afrika No. 8, Jakarta 10270 Attn. : Personnel Section Or Fax to : 021-5724433 email: hrd.kajima@gmail.com